Home » Products » Embedded Aluminum LED Solar Stud for Road C1
Embedded Aluminum LED Solar Stud for Road C1
Load Bearing: >20T(static)
Warranty: 18 Months
Body material: Heavy-duty casting aluminum
Power supply: The solar panel(monocrystalline 2.5V/0.2W)
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Installation Method Of Embedded Aluminum Solar Stud C1:
1. Carefully mark the distance between the placement of solar stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill Φ120mm and depth will be 50mm.
2. Remove all debris from the installation hole.
3. Pour epoxy into the holes per the manufacturer’s instruction.
4. Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the led solar road stud shaft.
5. Set the lighting surface of the solar stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar stud shaft.
6. After curing the LED solar stud for 6-8 hours, remove the installation of the isolation facility.