Heavy Duty Solar Stud Lights For Highways C2

Heavy Duty Solar Stud Lights Features:

• High brightness America brand led light with 100000 hours of working time.
• USA brand solar panel. 22% high conversion rate. Fast charge rate.
• Japan brand casting Al material. Solar road stud lights bear more pressure.
• Most quality Epoxy resin glue to fix the solar stud lights, making sure of solar power charge.
• Philips PC board, safe and stable. Long-time warranty for solar studs reflectors.
• The leader of solar road stud. Load capacity:>40T(can be installed in the middle of the road)

Aluminum Solar Stud Parameters:

Application of Heavy Duty solar studs C2:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Road Center

How to install Aluminum solar studs lights C2:

1.Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 127mm and depth will be 45mm.

2.Remove all debris from the installation hole.

3.Pour epoxy into the holes per the manufacturer’s instruction.

4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar road stud shaft.

5.Set the lighting surface of the solar stud light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar road stud shaft.

After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.